CH-200Nm³/h hydrogen production system — catalogue page 6
CH-200Nm³/h

200 Nm³/h PEM Hydrogen Production System

200 Nm³/h catalogue hydrogen output. Container-format enclosure. Check delivery pressure, site utilities and scope.

Hydrogen output
200 Nm³/h
Equipment format
Container-format enclosure
Maximum allowable pressure
3.0 MPa (catalogue)

Description & system fit

For renewable hydrogen, combined heat and power, semiconductor and integrated energy projects requiring a defined hydrogen-production configuration.

Match hydrogen demand and delivery conditions to the process. Confirm downstream compression, storage and site integration as separate scope items.

Technical specifications

HELE 2025 equipment catalogue, page 6 →

ParameterCatalogue value and conditions
Hydrogen production rate200 Nm³/hHydrogen output; confirm reference gas conditions and operating point.
Gas production rate300 Nm³/hSeparate catalogue field; do not use as hydrogen capacity.
Operating temperature5–65 °CCatalogue range; confirm the ordered operating envelope.
Hydrogen purity99.999%Agree gas-conditioning scope, sampling location, impurity limits and analytical method.
Dew point−70 °CConfirm gas pressure basis, conditioning and measurement method.
Maximum allowable pressure3.0 MPaNot a rating for downstream compression, storage or dispensing.
FeedwaterASTM D1193 Type I deionized water (>10 MΩ·cm), as printedConfirm the complete applicable water specification, monitoring and treatment scope.
Power supply voltage380/10K V as printed; electrical design to confirmConfirm phase, frequency, connection and electrical design.
Dimensions (L × W × H)6100 × 2400 × 2600 mmConfirm drawing revision, access, maintenance and installation clearances.
DC power consumption4.4 kWh/Nm³ H₂Catalogue DC value, not full-system AC consumption; confirm operating and measurement boundary.
Wide power range20–120%Catalogue wording; confirm reference rating and allowable duration.

What to check before ordering

  • Match hydrogen output to your project

    Compare the catalogue output of 200 Nm³/h with your process demand. Compare production with the plant demand profile and agree the interface to downstream gas treatment, compression or storage.

    Review PEM project planning and site requirements →
  • Confirm container and electrical interfaces

    Confirm container placement and service access. Ask HELE to confirm the electrical configuration for the site and the water and cooling connections.

    Review site utilities for PEM systems →
  • Agree the factory acceptance tests

    Confirm the ordered configuration and agree the tests, measurement conditions and records to include in the factory acceptance plan.

    Review manufacturing and testing scope →

Equipment & supply scope

Electrolysis core

PEM stack, process connections and defined operating envelope. Stack supply alone does not include a complete hydrogen plant.

Electrical & controls

Rectifier or DC power supply, PLC/HMI, measurement, alarms and communication interfaces as specified in the configuration.

Water & thermal management

Water treatment, circulation, heat removal and monitoring. Identify the incoming water specification and the cooling system responsibility.

Gas treatment

Gas-liquid separation, drying and purification where specified. The gas-quality commitment must identify the treatment equipment and sampling point.

Compression & storage

Downstream compression, cylinders, buffer storage and refueling equipment are separate scope items. Do not infer their inclusion from an electrolyzer pressure rating.

Site & acceptance

Skid or enclosure, piping interfaces, installation, commissioning, documentation and acceptance testing must be assigned explicitly.

Technical documents & evidence

Request the model-specific drawing, configuration list, inspection record and applicable conformity documents for the ordered unit.

Purchasing & drawing checklists

PEM project brief

A reusable worksheet for recording known conditions, units, document revisions and open questions.

Download CSV ↓
Check the revision on a saved document →

Frequently asked questions

What does CH-200Nm³/h identify?

It is the hydrogen-production system designation on page 6 of the supplied 2025 catalogue, with 200 Nm³/h listed hydrogen production. The ordered configuration and revision must be stated in the proposal.

Does the catalogue gas-production value mean hydrogen output?

No. Gas production and hydrogen production are separate catalogue fields. Use the hydrogen-production rate to discuss your hydrogen demand.

What is included with this system?

Agree the equipment list for the stack, power supply, water and cooling, separation, drying or purification, controls and enclosure. Downstream compression, storage, installation and commissioning are separate scope decisions.

What hydrogen purity can I specify?

Agree the required impurities and moisture at the delivery point, together with gas treatment and the measurement method. Catalogue figures alone do not define a guaranteed gas-quality package.

How is the energy figure interpreted?

The catalogue labels its value as DC power consumption. It does not establish complete-system AC consumption including conversion losses and auxiliaries.

What should I include in an enquiry?

Quote CH-200Nm³/h, the catalogue revision, operating schedule, gas-delivery pressure and quality, installation country, water, cooling, electrical supply and required documents. The enquiry link carries this model and page context.

Review your project with HELE

Reference CH-200Nm³/h and include:

  • Application and average/peak hydrogen demand
  • Operating hours and expected power profile
  • Gas quality, moisture and pressure at the point of use
  • Installation country, ambient conditions and utilities
  • Required document package, quantity and schedule
Send this model with your requirements →