New coil or fabricated component
Provide the equipment designer’s grade, drawing and operating conditions. Mark whether you need tube only, a formed part or an assembly.
Specify the service, tube, geometry and connections for an immersion coil, formed component or replacement assembly.

A raw tube order and a formed or welded component have different acceptance requirements. Identify the scope and share the conditions inside the coil and in the surrounding bath.
Provide the equipment designer’s grade, drawing and operating conditions. Mark whether you need tube only, a formed part or an assembly.
Send existing dimensions, nozzle or flange details and available tank space. Include photos and reported operating changes when relevant.
Start with the service specification and check the geometry against the tank arrangement before reviewing manufacturing or inspection options.
| What to compare | What to provide | What it helps confirm |
|---|---|---|
| Internal and external service | Provide the service fluid, bath composition and relevant temperature and pressure basis. | Which approved material and service specification to use for review. |
| Tube and geometry | State outside diameter, wall, coil envelope, pitch and drawing-defined bend requirements. | Whether the ordered form fits the installation and fabrication scope. |
| Connections and support | Mark nozzles, flanges or fittings, supports and orientation on the drawing. | What the maker must supply and how the coil interfaces with the tank. |
| Inspection basis | Specify dimensions, surface condition, records and any testing required for the assembly. | The inspection and release scope to include in the quote. |
Review the tube as purchased material and the fabrication options as a separate scope. Use controlled drawings to define what is supplied and inspected.
Prepare material and traceability requirements for the ordered tube or component.
Review separate material and component requirements for heat exchangers.
See how process-bath coils fit alongside plating and finishing equipment.
Share the coil drawing, service conditions and the item you need.
Find the related equipment and purchasing information for chemical & process equipment.
Review bend geometry, end position and inspection for formed tube.
Check fit-up, inspection and scope for a welded coil assembly.
A reusable worksheet for recording known conditions, units, document revisions and open questions.
Download CSV ↓