Titanium Anodes · Water Treatment & Electrochlorination

Titanium Anodes for Water Treatment and Electrochlorination

Match the electrode or cell to the treatment objective, feedwater chemistry and operating duty for a new installation or a replacement.

Skid-mounted sodium hypochlorite generator
On-site hypochlorite generator. Identify whether you need an electrode, a cell or a complete unit.

Why Does the Same Cell Size Need a Different Review?

A cell envelope tells you whether an assembly may fit. Feedwater chemistry and treatment duty determine which candidate electrode and cell should be reviewed.

Electrode or cell replacement

Send the equipment reference, installed electrode drawings and any operating changes since the last replacement.

New treatment installation

State the water source, target duty and whether procurement covers an electrode, a cell or a complete unit.

Match the Electrode to the Water and Treatment Duty

Use the treatment target and water analysis to define the operating basis; use the existing cell and electrical data to check the replacement scope.

Match process data to the anode decision
What to compareWhat to provideWhat it helps confirm
Water chemistryIdentify feedwater or brine source and share the available analysis, chloride content, pH, temperature and known impurities.Which electrode options merit review for the incoming water.
Treatment objectiveState the intended treatment, design water flow and output or dosing target if specified.Whether the inquiry concerns one component, a cell or a complete system.
Operating dutySupply normal and peak current, duty cycle and drawing-defined active area if known.A comparable electrical basis for the proposed replacement.
Cell interfacesProvide the model, physical envelope, terminals and connection drawings.Which mechanical, electrical and assembly interfaces are in scope.

Electrodes, Cells and Generation Equipment

Review each option at its supply level. Compare candidate coatings against the water analysis and intended reaction, and review equipment separately when a cell or complete generation unit is required.

Technical and Purchasing Resources

Related Documents

Purchasing & drawing checklists

Water process equipment review worksheet

Record known requirements, units, source documents and open questions. A planning worksheet, not a product specification or certificate.

Download CSV ↓
Check the revision on a saved document →

Before Requesting a Quote

What to Send for Review

  • Latest feedwater analysis and treatment or output target
  • Cell model, drawing or nameplate and photos of the ports and terminals
  • Normal duty, changes in operation and the required supply level
Request an Anode Review →

What to Agree Before Ordering

  • Confirm the approved water and electrical basis for the quoted item.
  • Identify the electrode, cell or equipment included and who handles integration.
  • Agree the required coating, dimensional and inspection evidence.