Titanium Anodes · Continuous Strip Plating

Titanium Anodes for Continuous Steel Strip Electroplating

Replacing an anode or specifying one for a new plating line? Start with the coating metal, bath chemistry, operating current and existing cell layout. Use these details to assess whether an MMO titanium anode is a suitable option and what needs to be confirmed before ordering.

MMO-coated titanium plate and mesh anodes with mounting tabs
MMO titanium anode forms. Confirm the assembly and coated faces from the drawing for your cell.

What Can Make a Strip-Plating Anode Hard to Replace?

Two anodes can have the same outside dimensions and still differ in coated area, connection points or clearance to the strip. For a replacement, check those details against the installed cell. For a new line, establish the same requirements from the cell design and planned operating duty.

Replacement or retrofit

Identify the cell station and send the existing drawing or photos. Include the current anode type and the reason for replacement, such as wear, contact damage or a change in bath conditions.

New line or cell

Share the proposed plating process, cell layout and rectifier duty. For zinc electrogalvanizing or electrolytic tinning, identify the specific bath and whether the cell is designed for insoluble anodes.

How to Match an Anode to Your Plating Cell

Use the bath and electrical duty to assess coating suitability. Use the strip position, cell geometry and connection drawings to check whether the proposed anode fits.

Match process data to the anode decision
What to compareWhat to provideWhat it helps confirm
Coating metal and bath chemistryState the metal deposited on the strip, main bath constituents, pH and operating temperature.Whether the coating is suitable for the intended anodic reaction and bath conditions.
Working current and active areaProvide normal and peak current per cell, how current is shared between anodes, and the coated area and faces included in the calculation.Whether candidate anodes are being compared on the same current-density basis.
Strip and cell layoutGive strip width and line speed, the cell layout, anode-to-strip gap and whether one or both strip faces are plated.How the coated area and placement fit the plating zone and available clearance.
Mounting and electrical contactsSend drawings for the mounting points, busbar or terminal connection and available installation envelope.Whether the assembly fits the existing supports and can connect to the current feed.

MMO Titanium Anodes for Review

If the cell uses insoluble anodes, review MMO-coated titanium against the bath and current duty. Use the cell drawing to assess the coated faces, mounting points and electrical contacts for the proposed assembly.

Technical and Purchasing Resources

Before Requesting a Quote

What to Send for Review

  • Plating metal, bath composition and operating temperature
  • Cell station, operating current and coated area if known
  • Existing anode drawing, or photos of the assembly and connections if the drawing is unavailable
Request an Anode Review →

What to Agree Before Ordering

  • Agree the drawing revision, envelope dimensions, mounting tolerances and connection details.
  • Mark which faces or zones must be coated and which contact areas must remain uncoated.
  • Agree the required inspection records, sampling and acceptance criteria before placing the order.