PEM Electrolyzers · Applications

PEM Electrolyzer Stack Testing

Define the stack under test, operating envelope, measurement channels and utility interfaces before comparing a test platform and a simple rack.

Single-channel PEM electrolyzer test platform
Example of a PEM electrolyzer test platform. Channel count and instrumentation depend on the test specification.

Which Tests Must the Platform Support?

Start with the stack and test protocol. The same stack connection can be used for different test programs, with different measurement channels, controls and data requirements.

Development or characterization

Identify the planned variables, measurement points, accuracy and data recording needs.

Qualification or repeat tests

Share the approved sequence, expected throughput and criteria for comparing results between runs.

Match the Test Protocol to the Platform

Record both the stack interface and the instruments, controls and services needed to run the planned tests.

Match project inputs to the equipment or material decision
What to compareWhat to provideWhat it helps confirm
Device under testShare stack drawings, electrical limits, ports and media connections.Which stack interfaces the rack or platform must accommodate.
Test protocolList test sequences, ranges and the required method of control.Whether a simple rack or a more instrumented platform should be reviewed.
Measurement and recordsIdentify channels, ranges, accuracy requirements and output format.Which sensors, logging and calibration records need to be included.
Facility and gas managementList available power, water and cooling, and the lab’s requirements for connections and gas handling.Which duties and interfaces the facility or equipment must provide.

PEM Test Platforms and Simple Test Racks

Compare the equipment by included controls, measurement channels and utility interfaces. Review any separate stack sourcing against the planned test fixture.

Technical and Purchasing Resources

Related Documents

Purchasing & drawing checklists

Hydrogen test and teaching equipment worksheet

Record known requirements, units, source documents and open questions. A planning worksheet, not a product specification or certificate.

Download CSV ↓
Check the revision on a saved document →

Before Requesting a Quote

What to Send for Review

  • Stack drawing and operating envelope
  • Test protocol, measurement requirements and records needed
  • Lab utilities, connection diagram and responsibilities for gas management
Request a PEM Equipment Review →

What to Agree Before Ordering

  • Approve included channels, ranges and data outputs.
  • Assign the stack, fixtures and laboratory services to the correct scope.
  • Agree the acceptance tests for the ordered platform.